型号：JH锦工-50U、JH锦工-65U、JH锦工-80U、JH锦工-100U、JH锦工-125U、JH锦工-150U、JH锦工-200U、JH锦工-250U、JH锦工-300U、JH锦工-350U
压力：29.4kpa～78.4kpa风量：1.52～58.02 m3/min
电机功率：1.5KW～110kw
密集型罗茨鼓风机，它集罗茨鼓风机、电机、空气滤清器、进出口消音器、止回阀、安全阀、压力表、减震器、软性接头、底座等部件于一体，结构紧凑、成套供应。该系列风机具有高效低噪，机组自我保护功能齐全，对管路系统和地基隔震功能好，同时具有罗茨鼓风机的通用特点：强制输气、输送介质绝对不含油等特点。
产品用途：
主要用于水泥、污水处理、水产养殖、冶炼、化工、电力等行业鼓风、气力输送等领域，输送介质为空气。
性能特点：
1、风机使用压力29.4～78.4kpa,应用广泛。
2、风机风量1.52-58.02m3/min覆盖面大，应用范围广。
3、风机叶轮采用复合型线，啮合完美，泄露少，效率高。
4、鼓风机材料是球墨铸铁，外形轮廓采用数控机床成型，齿轮5级精度，采用进口双列轴承，转子动平衡精度高于G6.3级，因此产品噪音低、运行可靠。
5、气流脉动小，整机震动低，运行平稳，对风机安装要求低。
6、产品整机结构紧凑，体积均匀，重量合理。
密集型罗茨鼓风机
JH锦工-50U:压力：29.4～78.4kpa风量：1.52～2.59m3/min电机功率：1.5～5.5kw
JH锦工-65U:压力：29.4～78.4kpa风量：2.14～3.51m3/min电机功率：2.2～7.5kw
JH锦工-80U:压力：29.4～78.4kpa风量：3.65～5.88m3/min电机功率：4～15kw
JH锦工-100U:压力：29.4～78.4kpa风量：5.18～9.81m3/min电机功率：5.5～18.5kw
JH锦工-125U:压力：29.4～78.4kpa风量：6.56～12.85m3/min电机功率：7.5～30kw
JH锦工-150U:压力：29.4～78.4kpa风量：10.75～29.13m3/min电机功率：15～75k
JH锦工-200U:压力：29.4～78.4kpa风量：26.35～58.02m3/min电机功率：22～110kw
密集型罗茨鼓风机是根据普通三叶罗茨鼓风机衍生而来，密集型罗茨鼓风机的的选型与普通罗茨鼓风机的选型是一样的，在选型、使用、维护方面和普通三叶罗茨鼓风机是一样，但是密集型罗茨鼓风机有自己的特点：
1、体积小
2、占地面积小
3、对空间高度要求高
4、安装更简单
密集型罗茨鼓风机的主要适用的工况多为：地面空间有限，而垂直空间充足，此类工况下，可以很好的适用密集型罗茨鼓风机。
密集型罗茨鼓风机可以做成皮带传动，也可以做成直连传动，可以根据用户需求进行定制，密集型的罗茨鼓风机可以从50型号做到350型号，可以满足我们的型号需求。
锦工风机专业生产密集型罗茨鼓风机，如果您有此方面的需求，可以联系我们的官方客服热线
：免费下载资料
国产老品牌：〖锦工〗?所有者锦工风机公司官网高压风机升压高达2.3MPa（2300KPa）
电话(Tel)：86-0838- / 传真(Fax)：86-0838-
地址(Add)：四川省广汉市沱水路18号 邮码(Zip)： 邮箱(Email)：
技术支持：锦工公司网办 备案号：蜀ICP备号
关键词：罗茨风机 罗茨鼓风机厂家 鼓风机 风机 磁悬浮鼓风机 烧结风机 多级离心鼓风机 锅炉引风机 高压风机 锅炉引风机 双级罗茨鼓风机 高速风机 四锦工风机
相关文章阅读：
三叶罗茨鼓风机工作原理:
密集型罗茨鼓风机均为三叶罗茨鼓风机，罗茨风机为容积式风机，输送的风量与转数成比例，三叶型叶轮每转动一次由 2 个叶轮进行 3 次吸、排气。与二叶型相比，气体脉动性小，振动也小，噪声低。风机 2 根轴上的叶轮与椭圆形壳体内孔面，叶轮端面和风机前后端盖之间及风机叶轮之间者始终保持微小的间隙，在同步齿轮的带动下风从风机进风口沿壳体内壁输送到排出的一侧。风机内腔不需要润滑油，结构简单，运转平稳，性能稳定，适应多种用途，已运用于广泛的领域。
三叶罗茨鼓风机的特点:
● 由于采用了三叶转子结构形式及合理的壳体内进出风口处的结构，所以风机振动小，噪声低。
● 叶轮和轴为整体结构且叶轮无磨损，风机性能持久不变，可以长期连续运转。
● 风机容积利用率大，容积效率高，且结构紧凑，安装方式灵活多变。
● 轴承的选用较为合理，各轴承的使用寿命均匀，从而延长了风机的寿命！
● 风机油封选用进口氟橡胶材料，耐高温，耐磨，使用寿命长。
● 机种齐全，可满足不同用户不同用途的需要。
● 采用线形优化后叶轮曲线和特殊结构的壳体，效率提高10%左右。
?主要技术指标:
●流量0.5m3～200m3/min；
●升压：9.8～78.4kPa。
The three-lobe roots type rotary blower type JGR of is a new product which has been developed by adopting innovated techniques, based on the manufacturing experience in the roots type rotary blowersfor many years.
The three-lobe roots type JGR high pressure rotary blower is a new product which has been developed by adopting innovated techniques,based on the manufacturing experience in the roots type rotary blowers for many years.
These blowers have improved full-adiabatic efficiency as well as volumetric efficiency and provide supperior air capacity vs.pressure characteristic.
The superiority of efficiency leads to reduction of the heat from the blower itself,and therefore,reduction of the temperature elevation,and thus the operation of blower in dry condition has become practical at the discharge pressure as low as 0.8kgf/cm2.
Roots Type rotary Blowers Features
1 JGR-HB three-lobe blowers needn’t water coolant within 80kpa boost pressure.
2 the helical construction uses the stator helical method that the screen lines of casing at the suction and discharge sides are cut to a helical shape,and the triangle suction and discharge port formed by a straight line of the rotor top is to be opened and closed gradually.
Therefore,the suction and discharge ports of this type is not opened or closed at momnets,which makes these blowers have an only limited operation suound and almost free from pulsations from discharge.
3 The rotors are ghree-lobe straight type,so that the rotors cannot interfere with each other,resulting from minor displacements in the trust direction as in the helical type.Therefore,the clearance between the rotors should be assured in the profile direction only and thus there is no necessity of an excessive clearance on account of displacements in the thrust direction as in case of the rotor helical type.From such reasons,these blowers hav e a very high efficiency,in comparison with the rotor helical type of same dimensions.
4 By adoption of an unique profile of rotor,the clearance between the rotors can be held to be constant,which makes the efficiency even higher.
5 The precision of rotors if fully controlled and variation of precision between blowers is almost nil because the rotors are produced under the mass production control by utilizing a premision NC maching.In addition,the rotors are dynamically balanced in the faJGRication stage already,so that these rotors are almost free from viJGRations as in the case of conventional rotors which are still unbalanced.
6 The advancedest driving gears are adopted not only to extend the use life but also to make noise lower.The gears are made in special Cr-M.steel by hardening treatment and are made according with gear precision of JIS first-class.Therefore,the harmful disturbances to products from gears are avoided.
7 The transported air is clean and any oil-dust free oil luJGRication is not needed in casing and the structure design present the bearing oil and gear ooil from entering the casing.
8 With the establishment of quality management system and manufacture management system,the aims of parts exchanging,less production cost and rapid delivery are realized.The blowers of right quantity are keeped in stock to make delivery in time.
山东锦工有限公司
山东省章丘市经济开发区
24小时销售服务
山东锦工有限公司
地址：山东省章丘市经济开发区
电话：0531-83825699
传真：0531-83211205
24小时销售服务电话：15066131928
